“Marine Radio and marine accessories at unbelievable prices.”
more >>
Nick Noll.
|  |


 DISCONTINUED
ICOM M302-01 VHF Marine Radio
ICOM M302
ICOM M302 FEATURES
- Large
backlit LCD
- Force5Audio™
- Built-in
DSC capability
- Submersible
1m depth for 30 minutes
MORE ICOM M302 FEATURES
- Large
backlit LCD
- The
wide LCD shows large channel numbers and channel names of up to 10
characters. 4 levels of LCD
backlighting are available.
- Force5Audio™
- The
speaker's high sound pressure level delivers loud and clear
reception. Background noise is
blown away! The microphone is
tuned to pick up voice, while reducing ambient noise.
- Built-in
DSC capability
- The
DSC (Digital Selective Calling) allows you to send a formatted distress
message in an emergency. Position
data is automatically exchanged between the two stations.
- Submersible
1m depth for 30 minutes
- The
installation of the IC-M302 is not limited to covered areas. Be assured, the IC-M302 can handle all
types of wet! Equivalent to JIS
Grade 7.
IC-M302 Specifications
General
- Frequency
Range Tx 156.025-157.425 MHz
- Rx
156.050-163.275 MHz
- Usable
channels USA, CAN, INT, WX channels
- Type
of emission 16K0G3E, 16K0G2B
- Power
supply 13.8V DC ±15%
- Current
drain
- (at
13.8V DC) Tx 5.5A (at 25W output)
- Rx
1.5A (at AF max.)
- Operating
temperature range -20°C to +60°C; -4°F to +140°F
- Antenna
impedance 50O (SO-239)
- Dimensions
(WxHxD, projections not included) 153x67x132mm, 61/32x25/8 x 53/16 in.
- Weight
(approx.) 825g; 1.8lb
- NMEA
formats RMC; CGA, GNS, GLL
Transmitter
- Output
power 25W or 1W (at 13V DC)
- Modulation
system Variable reactance frequency modulation
- Max.
freq. deviation ±5kHz
- Frequency
error ±10ppm
- Spurious
emissions Less than -70dBc (at 25W)
- Adj.
channel power More than 70dB
- Audio
harmonic distortion Less than 10% (at 60% dev)
- Residual
modulation More than 40dB
Receiver
- Intermediate
freq. 1st 21.7MHz, 2nd 450kHz
- Sensitivity
0.22µV typical at 12dB SINAD
- Squelch
sensitivity Less than 0.22µV
- Adj.
Ch. selectivity More than 70dB
- Spurious
response More than 70dB
- Intermodulation
More than 70dB
- Hum
and noise More than 40dB
- Audio
output power 4.5W typical at 10% distortion with a 4O load
Supplied Accessories
- Hand
microphone
- DC
power cable
- Mounting
bracket kit
Options
- MB-69
FLUSH MOUNT KIT: For flush mounting the IC-M302 to a flat surface such as
an instrument control panel.
- MB92
DUST COVER: Protects the IC-M302 from dust and strong sun light when the
radio is not in use.
- HM-141B/141W/141G
HAND MICROPHONE: White, black and gray are available. Same as supplied.
|
|